home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19961006-19970104 / 000090_news@columbia.edu _Thu Oct 31 22:52:47 1996.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Return-Path: news@columbia.edu
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30]) by watsun.cc.columbia.edu (8.7.5/8.7.3) with ESMTP id WAA23562 for <kermit.misc@watsun.cc.columbia.edu>; Thu, 31 Oct 1996 22:52:47 -0500 (EST)
  3. Received: (from news@localhost) by newsmaster.cc.columbia.edu (8.7.5/8.7.3) id WAA19427 for kermit.misc@watsun; Thu, 31 Oct 1996 22:52:45 -0500 (EST)
  4. Path: news.columbia.edu!panix!feed1.news.erols.com!howland.erols.net!cs.utexas.edu!news.cs.utah.edu!cc.usu.edu!jrd
  5. From: jrd@cc.usu.edu (Joe Doupnik)
  6. Newsgroups: comp.protocols.kermit.misc
  7. Subject: Re: MS-Kermit Terminal Emulation Over TCP/IP
  8. Message-ID: <1996Oct31.200255.88253@cc.usu.edu>
  9. Date: 31 Oct 96 20:02:55 MDT
  10. References: <846708546.18587.0@defsdoor.demon.co.uk> <558jsl$t05@samba.rahul.net>
  11. Organization: Utah State University
  12. Lines: 59
  13.  
  14. In article <558jsl$t05@samba.rahul.net>, Clarence Dold <dold@rahul.net> writes:
  15. > Andrew Porter (andy@defsdoor.demon.co.uk) wrote:
  16. > : At work we have a Novell (3.14) network and 2 SCO Unix (3.2.4)
  17. > I have Novell 3.12, Unixware and ESIX SVR4.
  18. > : supports ansi terminals.  I would like to join the two networks and
  19. > MSKermit would probably do fine configured as a vt102.  That is generally a
  20. > superset of the ANSI terminal.  Unless this software is specifically rude.
  21. > : Our software supplier wants us to use something called ICE TCP which
  22. > : they say they will only use - but they want to charge us 500 pounds
  23. > For 500 pounds, they might be specifically rude (see above).
  24. > But probably not.  
  25. > I have used ICE.  I prefer MSKermit.  
  26. > And at the time, cost was not a factor.
  27. > : Could anyone point me somewhere in the right direction please ?
  28. > Kermit is available on the Internet via anonymous ftp from host 
  29. > watsun.cc.columbia.edu [128.59.39.2]
  30. > http://www.columbia.edu/kermit
  31. > kermit/read.me kermit/bin/read.me explain file locations.
  32. > The Novell VLM + IPXODI and TCP net.cfg is not intuitive to some folks.
  33. > I can't remember how difficult it was to discover the magic incantations,
  34. > but ultimately, after getting Netware to work via IPXODI, I modified the 
  35. > net.cfg to accept MSKermit TCP:
  36. > Link Driver NE2000
  37. >     INT 5
  38. >     PORT 320
  39. >     MEM D0000
  40. >     FRAME Ethernet_802.2
  41. >        Frame Ethernet_II
  42. >     Frame Ethernet_SNAP
  43. >         Protocol IP     0800    Ethernet_II
  44. >         Protocol ARP    0806    Ethernet_II
  45. >         Protocol RARP   8035    Ethernet_II
  46. > As I recall, one of these settings doesn't agree with the docs, but was
  47. > visible on the screen as the VLM loaded.
  48. > ---
  49. > Clarence A Dold - dold@rahul.net
  50. >                 - Pope Valley & Napa CA.
  51. ---------
  52.     Thanks Clarence. The differences in NET.CFG from my recommendations
  53. to your example are in the two extra frame kinds, Ethernet_802.2 and
  54. Ethernet_SNAP. If you are actually running Ethertalk (Appletalk on Ethernet)
  55. then Ethernet_SNAP is an appropriate addition. I think you know my words
  56. on avoiding Ethernet_802.2 as a frame without a merit. Thus my example, which
  57. is real world production, uses only Ethernet_II.
  58.     Joe D.